Comments Enter a description up to 63 characters to describe the interface. If your FortiGate unit supports AMC modules, the interfaces are named amc-sw1/1, amc-dw1/2, and so on. Perimeter 81 Gateway Proposal Subnets: by default, this should be set to 10.XXX./16 (do. When configured, the FortiGate unit sends broadcast messages which the FortiClient software running on an end user PC is listening for. set ip 255.255.255.0 After the management IP address has been configured, use the new management IP address to access the FortiGate login page. If you are configured for non-standard ports then you will see something like the example below. Security Mode Select a captive portal for the interface. Link Status Indicates whether the interface is connected to a network (link status is Up) or not (link status is Down). Therefore, set the IP address of the NIC of the maintenance PC to one of the IP addresses in the subnet of 192.168.1./24. Created on As we can see the IP Address is reachable which means it is working properly now, we will access the FortiGate Firewall GUI using its management interface IP address. Such use may adversely impact system stability. Heres a quick recipe on restricting management access to the Fortigate firewall. Double-click the row for a physical interface to edit its configuration or click Add if you want to configure an aggregate or VLAN interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |